Rotary Vane Gas Machines

Rotary Vane
GAS MACHINES

Single- and double-stage

Rotary Vane
Gas Machines

CONTACT US

We understand a Vacuum Pump for gas application or a Gas Compressor as the pumping Air-End, that is the mechanical device without lubrication circuit. Pneumofore supplies the vacuum pump or the gas compressor bare-shaft or completed with connection accessories.

The K Series Gas Compressor Systems and the KV Series Gas Vacuum Systems are the entire units, which include the skid with structural supports to host the electrical drive, the lubrication and cooling circuit, as well as the measurement and control devices. The electrical cabinet can be within the scope of supply and it is usually installed separately.

The K2 Series Gas Booster Compressor Systems are designed to compress gas from the inlet pressure of 2 to 10 bar(g) to the outlet pressure up to 18 bar(g). Almost every compressor has different working parameters, as the inlet and outlet pressure can vary strongly, this requires a dedicated study for the correct lubrication and cooling design.

The KD Series Double-stage Gas Compressor Systems are composed of 2 compression stages to reach end-pressure of 11 to 18 bar(g). Assembled on a single or double skid, these systems can be set-up for air- or water-cooling, out- or indoor, with or without cabin and electrical devices.